Order a call

Special heat-expanding paint "OGRAX-VSK". It ensures the creation of a heat-insulating layer on the protected surface. Under the influence of heat, the paint expands and forms a foam that prevents the wood from warming up. The material is a water-dispersion paste created on the basis of a special polymer formula. It is intended for indoor use in rooms with a humidity of no more than 85%.

Price: on request

Features

  • Eco-friendly water-based material
  • A large number of compatible primers and enamels
  • Operation in dry rooms
  • Field of application

    This material is used for fire protection of timber. Material swells when exposed to thermal shock and forms foam which prevents combustion of timber. Fire protection coating OGRAX-V-SK is designed for indoor use at temperatures between -50 °C to +60 °C and a relative humidity up to 85%.

    Characteristics

    Thinner
    water
    Colour
    white
    Expansion ratio
    at least 2500 %
    Dry residue
    71±3%
    Dry coating density
    1,3±0,2 g/cm33


    Fire protection material description

    Fire protection intumescent material OGRAX-V-SK® – is water-dispersion material based on a polymeric material, containing specific excipients. The coating is non-toxic, emits no harmful substances in service, does not form toxic compounds on contact with other substances and under influence of other factors The material is delivered ready for use in metal containers with tight lids.

    OGRAX-V-SK® was certified for compliance with Technical Regulations of Fire Safety Requirements (Federal Law №123 from 22 July 2008), test method as per GOST R 53292-2009.

    Storage and operation conditions

    Storage and transportation
    in a sealed container at temperature from 0 °C to + 40 °C, freezing is not allowed
    Guaranteed shelf life
    one year after manufacture date
    Coating service life
    at least 10 years


    Application method

    • Mix the paste prior to application.
    • Apply with brush, roller or spray.
    • Air temperature during application must be less than + 5 °C and relative humidity is above 85%.
    • Surface to be protected must be cleaned.
    • Use personal protection equipment (mask, goggles). In case of contact with eyes, rinse them thoroughly with water.
    • Complete drying in three days under the condition of ventilation, at temperature from +15 °C to +20 °C, relative humidity less then 85%..